100% waterproof–won't break down when exposed to outdoor elements
Two 2oz Bottles & One 0.75oz Pen
Incredibly strong: Expands 3 times into the materials to form an incredibly strong bond
Bonds wood, stone, metal, ceramic, foam, glass and more!
Pen has Precision Applicator
Prepare and Dampen Surfaces
If you’re using White Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first. Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.
Evenly Apply White Gorilla Glue Onto the Dry Surface
Carefully apply a paper thin layer of White Gorilla Glue onto the other, dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution. If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.
Clamp the Two Surfaces Together Tightly
Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 30–60 minutes. For best results, allow 24 hours to cure.
If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.
After each use, wipe lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place.
Policies & plans
TOTAL OUNCES: 4.75oz - Two 2.0oz Bottles, One 0.75oz Pen of Gorilla Glue Dries White
APPLICATION TEMPERATURE: above 40 degrees F, best at room temp.
OUTDOOR USE: Yes
MOISTURE RESISTANT: Waterproof
PAINTABLE/SANDABLE/STAINABLE: Yes, with oil-based and spray paints. Acrylic/latex and stains require sanding
CURED COLOR: White
GAP FILLING: No
EXPANDS WHEN CURED: Yes
TECHNICAL STANDARDS: ANSI/HPVA Type I
STORAGE TIPS: Store in a cool, dry location. Avoid laundry rooms, under sinks, and kitchen cabinets
For additional questions or concerns regarding this product, please contact The Gorilla Glue Company's Customer Service Department at 1.800.966.3458